Vision One Deutsch Vision One 
Technology

The Vision One technology which is a real innovation has been patented.  We are the only company which has been able to develop and market this type of autonomous unit. Their design required a very specific know-how.

Find out why they are so special..


Safety of use and resistance in difficult weather conditions ...

The products VISION ONE are built exclusively with flexible materials. It is a pledge of SAFETY in the current use and an obvious advantage on the level of the WEIGHT and transport.

Faces with the gusts of wind, our modules are DISTORTED slightly and return then in their initial form WITHOUT DAMAGE. It is the principle of the "reed in front to the oak". The structures Vision One fold whereas the rigid tents face the wind for then folding and breaking down.

At the time of our tests, with an adapted staying, our modules resisted winds of more than 80 Km/h.

Welcome Roof

tente publicitaire gonflable

1 : RipStop Skin or Dacron (3D Comp)

2 : Stitching 8 layers with nylon core
     Enabling to endure the inflating pressure

3 : Linings Pvc

4 : Dacron un-elastic

5 : Polyurethane elastic, airproof and resistant

Totem

totem publicitaire

The advertising totem uses same technology that the modules Welcome Roof, it is composed of a tight interior membrane covered by fabric RipStop Skin.


ConnecTent

Thanks to the ConnecTent system, our modules can be linked between them, and to cover exactly desired surface. You can thus modify very quickly the configuration of your space.

technologie welcome roof

Materials



Weight: 52 gr/m²


 Ripstop Skin : 52 gr/m2 polyester, treated against UV rays with a long coated with silicon, double faced seam to keep the unit waterproof and squared for increased resistance.
The RIPSTOP SKIN has an ideal weight/sturdiness ratio to cover the modules.

Weight: 145 gr/m²


 3D COM (or Dacron) : composite, multi-axial 145gr/m2 fabric capable of resisting all strains (notably the wind, from any direction). Such material allows optimum technical solutions.
The 3D COMP has the best weight/mechanical resistance ratio.
gonflable technologie sandwich seam The leading edge and slat stitching are 8 layers thick and are reinforced by technical self-adhesive material. The SANDWICH SEAMS allow the material and the stitching to stand up to the air pressure.




Know more about ...

Our Products

Discover our broad range of solutions

Our Distributors

Looking for distributor arround your place

Our Accessories

Full accessories range

Contact us

Should you need a quotation, feel free to contact our sales department

Vision One news

Follow the factual news through the move of Vision One team.

  

Technlologies


52 gr/m2 polyester, treated against UV rays with a long coated with silicon, double faced seam to keep the unit waterproof and squared for increased resistance.
The RIPSTOP SKIN has an ideal weight/sturdiness ratio to cover the modules.
Composite, multi-axial 145gr/m2 fabric capable of resisting all strains (notably the wind, from any direction). Such material allows optimum technical solutions.
The 3D COMP has the best weight/mechanical resistance ratio.
The leading edge and slat stitching are 8 layers thick and are reinforced by technical self-adhesive material. The SANDWICH SEAMS allow the material and the stitching to stand up to the air pressure.



Vision One group
 
 
 
 
Map Site| First-page |  Contact| Catalogue| Accessories| Technology| Presentation| Value| Distributors| Recrutement| News| Activities| Partners| Suppport
copyright © 2006-2007 vision one. all right reserved